Skip to content

Technical portfolio · selected work

IT projects and case studies

Projects shaped by real operational problems.

Network modernization across regional offices, firewall reporting and IT asset work from my role at CIMMYT, plus software and homelab projects I build and run myself. Each entry covers the problem, what I did, and what changed, with the measured results where I have them.

3 country offices Moved to one Fortinet design in 2026
12 projects Infrastructure, automation, software, homelab
1 office delivered fully remotely Turkey, from Nepal, no travel
2025–2026 Work period shown
Infrastructure & networking
02

Nepal Office Network Modernization

Done in two phases. In March 2026, with only the new firewall delivered, I split a flat office network into separate staff and guest networks on the existing Cisco switches and access points, as a stopgap. In September, once the rest of the equipment arrived, I replaced the four Cisco switches and eight standalone access points with FortiSwitch and FortiAP, managed from the firewall, and added a separate camera network.

Office network upgrade to segmented VLANs
View details

What changed

  • Firewall, 3 switches and 7 access points now managed from one console instead of 12 separate devices
  • Staff, guest and camera networks; staff can view cameras, but cameras and guests cannot reach staff devices
  • Guest network sized for many visitor devices, with one-day address leases
  • Firewall administration available only from inside the office, with named admin accounts
  • Web filtering, DNS filtering and application control switched on
  • Network documented in NetBox
Wi-Fi download, from my reports
StageBeforeAfter
Phase 1 (March, one test)about 7 Mbps41.8 Mbps
Phase 2 (September, median)5.8 Mbps92.9 Mbps

Before and after tests in Phase 2 were taken on different devices, so treat them as indicative rather than a strict comparison.

March & September 2026
FortiGate 91G
FortiSwitch 248E-FPOE
FortiAP 231K / 231F
VLAN segmentation
SD-WAN ready for a second ISP
Read the Phase 1 VLAN case study → Read the Phase 2 Fortinet case study → Need something similar? →
03

Bangladesh Office Network Migration

Wired connections were stuck at about 92 Mbps on every floor and Wi-Fi was weak. Before designing anything I traced the cause: switch ports limited to 100 Mbps, and network runs made with copper-clad aluminium cable intended for CCTV, which does not meet Cat5e or Cat6. The fix replaced the firewall, switches and access points, replaced about 70 m of that cable with Cat6, and added staff, guest and camera networks.

View details

How it was done

  • Deployment plan, port map and firewall configuration prepared in advance; firewall pre-configured before shipping
  • Cutover from Thursday evening through the weekend, with old equipment kept on site as a fallback until testing passed
  • Three internet links combined under SD-WAN with health checks
  • Wi-Fi tuning: four access points had manual settings forcing clients onto a crowded 2.4 GHz band; replaced with one site profile using automatic power and channel selection
  • Filtering behaviour checked against the Nepal office so the two match
Download speeds, from my migration report
TestBeforeAfter
Wired (median)92 Mbps723 Mbps
Laptop Wi-Fi (median)79 Mbps158 Mbps
Phone Wi-Fi4–19 Mbps132 Mbps (one test)
July – September 2026
FortiGate 91G
FortiSwitch 248E-FPOE
FortiAP 231K
SD-WAN
Cat6 recabling
Read the full case study → Part of the regional rollout → Need something similar? →
04

Turkey Office Migration, Delivered Remotely

The Turkey office ran four separately managed systems from 2018, out of warranty and support. I replaced them with the same Fortinet design as the other offices without travelling: I configured everything from Nepal and guided an on-site colleague, who had not handled network equipment before, through every physical step on a video call, one cable at a time. Each move was confirmed on the firewall before the next.

View details

Problems along the way

  • Remote session dropping: the remote-access tool ran over the network being changed, so I worked in short steps, saved often and kept a second call open
  • Address clash: the provider's router used the same range as the firewall's default ports; I moved the firewall's range and added the lesson to the next office's plan
  • Undocumented internet service: collected the details on a call and recorded them in the report
Download on the same office PC, from my report
BeforeAfter
24.4 Mbps (one test)71.8–93.9 Mbps (15 tests)

The office uses a shared mobile internet connection, so speeds vary with time of day.

28 Sep – 2 Oct 2026
FortiGate 91G
FortiSwitch 148F-FPOE
FortiAP 231K (Wi-Fi 7)
Remote delivery
Teams · TeamViewer
Read the full case study → Part of the regional rollout → Need something similar? →
05

Bandwidth Control and Data-Usage Analysis for a Field Station

A research station in Kenya on satellite internet was using data at roughly twice its monthly budget. Working remotely, I read the firewall's daily reports, then throttled video and social media to 2 Mbps instead of blocking them (staff sometimes need video for work), kept Teams, Zoom and email unthrottled, and blocked TikTok through DNS filtering because the firewall could not identify it as an application.

View details

What the follow-up showed

Three weeks later I combined 24 days of daily reports into one analysis. Usage had not dropped to the level I expected. The main drivers were not video: two laptops bulk-uploading to OneDrive and SharePoint, and a large number of personal phones on the Wi-Fi. The report set out specific next steps, including per-device limits on the phone network and following up with the two heavy uploaders.

I include this one because the first fix did not fully work, and the data showed why.

September – October 2026
FortiGate
Traffic shaping
DNS filter
Application control
Python report analysis
Read the full case study → Need something similar? →
Automation & software
06

FortiGate Security Reporting and Audit Automation

The firewall produces one PDF security report per day, which nobody can read thirty of. I wrote Python scripts that turn a month of daily PDFs into a single monthly report, stating which days are missing rather than hiding the gap. For a policy review I wrote PowerShell, with an embedded C# parser for logs too large for normal tools, that turns policy exports and traffic logs into Excel workbooks showing how often each rule is used.

View details
  • Monthly report: traffic and session totals, peak days, filtering evidence, and a list of events worth reviewing
  • The report refuses to claim "no threats" when raw logs were not part of the input
  • Audit workbooks: per-rule hit counts, bytes and first/last use, plus NAT and system events
  • A verification step checks every sheet for formula errors before the workbooks are shared
  • The same report parsing was reused for the field-station analysis (project 05)
August 2026
Python
PowerShell + C#
PDF parsing
Excel reporting
FortiGate logs
Read the full case study → Need something similar? →
07

OpenAsset ITAM

An IT asset management application I built from the work I do every month: inventory, assignments, depreciation, chargeback, and disposal with evidence. It runs offline on Windows and macOS, with an optional online edition that serves the same app to several people in a browser.

View details
  • Assets, people, contracts, assignments and full history
  • Roles and a permission matrix, with an audit trail where each entry is chained to the last so edits show
  • Encrypted backup and restore, validated CSV import, reports and dashboard
  • Automated tests (run on SQLite and PostgreSQL), CI builds, and a signed Windows installer
  • Written procedures for onboarding, returns, exits, licences, disposal and month-end
October 2026 · v1.2.2
Go · Wails
React
SQLite · PostgreSQL
GitHub Actions
Code signing
Read the full case study → Need something similar? →
08

Network Engineer AI

A self-hosted assistant for network engineers, running on a small virtual machine in my homelab. It reviews FortiOS and Cisco IOS configurations, searches a knowledge base of uploaded documents, and answers with exact commands plus risk and rollback notes. It is built around guardrails: secrets are stripped before anything is stored, and every AI action passes allowlists, a risk check, approval and an audit log.

View details
  • 24 configuration checks that run without AI, so they cost nothing (Telnet, default SNMP, any-any rules, missing logging and more)
  • Monthly and per-task budgets, with automatic switch to cheaper models as the budget is used
  • Multi-factor sign-in on every login; remote access through Cloudflare Tunnel and Access
  • Read-only device access over SSH is built but switched off until it has been tested in the lab
November 2026 · in progress
Python · FastAPI
PostgreSQL
React
Docker on Proxmox
Cloudflare Access
Read the full case study →
09

YaadRestore AI

Old-photo restoration that runs entirely in the browser, so photos never leave the visitor's device. It repairs fading, dust and scratches, restores faces, fills larger tears the user paints over, and can add colour as a separate, labelled copy. It uses the graphics card when available and falls back to the processor when not, and works offline once installed.

Live since October 2026
React · TypeScript
ONNX Runtime Web
WebGPU / WebAssembly
Progressive web app
English · Nepali
Read the full case study → Try YaadRestore AI →
10

Building a Secure Membership, Paywall & LMS Platform

Modernized a Blogger-based website into a secure membership and learning platform with authentication, premium-content protection, course delivery, payment workflows, administrative tooling, and browser-based utilities. Blogger remains the public publishing layer while Supabase provides backend services, authorization, membership state, course data and progress tracking.

Membership, paywall and course platform built on Blogger and Supabase
August 2026
Blogger
Supabase
PayPal
Edge Functions
Membership · LMS
Read the membership and LMS case study → Need something similar? →
Homelab
11

Homelab Intelligence

A self-hosted platform that keeps a record of what runs in my homelab, where it runs, how it connects, what changed and what needs attention. It is read-only by design: it uses a Proxmox account that can look but not change anything, so a bug or a stolen session cannot touch the infrastructure.

View details
  • Change history, storage findings, configuration drift and dependency views
  • Network map built from Proxmox and a declared inventory
  • Backup checks with fix playbooks; the rack view highlights a machine only when its backups fail
  • Built in milestones, each with a written acceptance report, including a one-week trial run before going live

The homelab runs Proxmox VE with TrueNAS storage, NetBox, Snipe-IT, Nextcloud and Pi-hole.

November 2026 · in production
Go
Proxmox API (read-only)
Docker
GitHub Actions
Cloudflare Tunnel
Read the full case study →
12

TrueNAS Home Server Deployment

Designed and deployed a TrueNAS home server for centralized storage, backup automation, dataset permissions management, and virtualization-related workloads. The project provided a structured environment for storage management, testing, and continuous infrastructure learning.

TrueNAS home server deployment
August 2025
TrueNAS
Storage
Backup
Dataset Permissions
Virtualization
Read the TrueNAS home server build → Need something similar? →

Have a similar problem to solve?

I take on network, infrastructure, Microsoft 365 and server projects for offices and teams. Clear scope, price agreed before work starts.

See services and pricing →