A bootable USB installer is a USB drive that holds the full macOS installer and can start a Mac by itself. It's the one Mac tool I always keep in my bag. It installs or reinstalls macOS without a fresh 15 GB download on every machine, and it still works when the Mac's own disk has been wiped. On a slow office connection in Kathmandu, downloading once and installing from USB saves hours when there are several Macs to set up.
Apple builds the tool for this into every macOS installer. It's a Terminal command called createinstallmedia. This guide covers every version from macOS 27 Golden Gate back to High Sierra: the exact commands, how to boot Apple silicon and Intel Macs from the drive, and the fixes for the errors people usually hit.
Quick answer
To make a bootable USB installer for Mac, download the full Install macOS app into Applications. Erase a 32 GB USB drive in Disk Utility as Mac OS Extended (Journaled) and name it MyVolume. Then run Apple's createinstallmedia command in Terminal. To boot from the drive, hold the power button on an Apple silicon Mac or hold Option on an Intel Mac. Intel Macs with a T2 chip must allow external boot first. Checked against Apple's guide on 18 November 2026.
What do you need to make a macOS USB installer?
You need a USB drive of 32 GB, a working Mac and the full installer for the macOS version you want. According to Apple's bootable installer guide, 32 GB is more than enough for any macOS installer, and 16 GB is enough for most older versions.
| Item | Details |
|---|---|
| USB drive | 32 GB, ideally USB 3 or USB-C, which copies much faster than USB 2. Everything on it gets erased |
| A working Mac | To build the drive. If you can, use one that supports the version you're downloading |
| Full installer | "Install macOS [name].app" in Applications, roughly 15 to 18 GB |
| Admin password | For the sudo command |
| Internet on the target Mac | Apple says the installer fetches firmware for that specific model during install |
Step 1: Download the full macOS installer
You need the full installer, not a small update. The easiest way is the App Store: search for the version you want (for example macOS Golden Gate or macOS Sequoia) and click Get. When the installer opens by itself, quit it with Command + Q. If you let it install, it deletes itself afterwards and you'll have to download it again.
Terminal can also download any full installer Apple still offers. First, list them:
softwareupdate --list-full-installers
Then download the version you want by its number:
softwareupdate --fetch-full-installer --full-installer-version 27.2.1
Either way, check that Install macOS [name].app is now in Applications. For older versions like Ventura or Monterey, Apple's How to download and install macOS page has direct links. If you manage Macs at work, Apple says to download from Apple directly, not from a locally hosted update server.
Step 2: Format the USB drive in Disk Utility
createinstallmedia erases the drive itself, but formatting it yourself first avoids most of the "could not erase" errors.
- Plug in the drive and open Disk Utility (Applications > Utilities).
- Choose View > Show All Devices, then select the drive itself in the sidebar (the top entry), not the volume under it.
- Click Erase. Set the name to
MyVolume, the format to Mac OS Extended (Journaled) and the scheme to GUID Partition Map. - Click Erase, then Done.
The name matters. Apple's commands all point at /Volumes/MyVolume. If you name the drive something else, change the command to match.
Step 3: Run createinstallmedia in Terminal
Open Terminal (Applications > Utilities), paste the command for your version and press Return. These are Apple's commands exactly as published.
macOS 27 Golden Gate
sudo /Applications/Install\ macOS\ 27\ Golden\ Gate.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume
macOS Tahoe 26
sudo /Applications/Install\ macOS\ Tahoe.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume
macOS Sequoia 15
sudo /Applications/Install\ macOS\ Sequoia.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume
For an older version, use the same command with that installer's name in place of Install\ macOS\ Sequoia.app. Put a backslash before every space:
| Version | Installer name in the command |
|---|---|
| Sonoma 14 | Install\ macOS\ Sonoma.app |
| Ventura 13 | Install\ macOS\ Ventura.app |
| Monterey 12 | Install\ macOS\ Monterey.app |
| Big Sur 11 | Install\ macOS\ Big\ Sur.app |
| Catalina 10.15 | Install\ macOS\ Catalina.app |
| Mojave 10.14 | Install\ macOS\ Mojave.app |
| High Sierra 10.13 | Install\ macOS\ High\ Sierra.app |
A trick that avoids typos: type sudo with a space after it. Then right-click the installer app, choose Show Package Contents, open Contents > Resources and drag createinstallmedia into Terminal. Type --volume and drag the USB drive in from Finder. Terminal fills in both paths with the right escaping.
The prompts you'll see
- Password: type your admin password and press Return. Nothing shows while you type. That's normal.
- "To continue we need to erase the volume": type
Yand press Return. - Terminal would like to access files on a removable volume: click OK.
- Erasing disk, then Copying to disk with a percentage: wait. A fast USB 3 drive takes around 10 minutes. A slow USB 2 drive can take 30 minutes or more.
- "Install media now available": done. The drive is renamed to the installer's name, for example "Install macOS Golden Gate". Quit Terminal and eject the drive.
Step 4: Boot a Mac from the USB installer
How you boot from the USB installer depends on the chip. In Apple menu > About This Mac, Chip: Apple M1 (or M2, M3 and later) means Apple silicon, and Processor: Intel means an Intel Mac. Either way, plug the drive straight into the Mac, not into a hub or dock.
On an Apple silicon Mac (M1 and later)
- Shut the Mac down.
- Press and hold the power button until you see Loading startup options.
- Select the USB installer, click Continue and follow the on-screen steps.
On an Intel Mac
- Shut the Mac down, turn it on and immediately press and hold Option (⌥).
- Let go when the startup disks appear, select the installer and press Return.
- Choose your language, then select Install macOS from the Utilities window and click Continue.
Intel Macs with Apple's T2 security chip (most models from 2018 to 2020) block booting from USB by default. Start up holding Command + R to get into Recovery. Open Utilities > Startup Security Utility, select Allow booting from external or removable media, then try again.
For a clean install, open Disk Utility from the installer's Utilities window first. Erase the internal disk (usually "Macintosh HD") as APFS, then go back and choose Install macOS.
What goes wrong (and how to fix it)
| Error or symptom | Fix |
|---|---|
command not found | The path is wrong. Check that the installer is in Applications and its name matches the command, with a backslash before each space. The drag-and-drop trick avoids this |
| "not a valid installer application" | The download is incomplete or is only a small stub installer. Delete it, empty the Trash and download the full installer again |
| "Error erasing disk" | Erase the drive again in Disk Utility as Mac OS Extended (Journaled) with GUID Partition Map, then rerun the command. If it keeps failing, try another drive |
| "not a valid volume mount point" | The drive isn't named MyVolume or isn't mounted. Rename it or change the command |
| Circle with a line through it at startup | That Mac doesn't support this macOS version. Make an installer for an older version it does support |
| USB not shown in startup options | Plug it in directly and try another port. On a T2 Intel Mac, allow external boot first |
| El Capitan or Sierra fails | These also need --applicationpath followed by the installer's path at the end of the command |
Can you make a Mac bootable USB on Windows?
No, not with Apple's supported method: createinstallmedia only runs on macOS, and Apple has no supported way to build a macOS installer from Windows. If the only Mac you have is the broken one, you have two options:
- Borrow a Mac for half an hour. The drive you make works on any Mac that supports that version.
- Use macOS Recovery. Hold the power button on Apple silicon, or Option + Command + R on Intel for Internet Recovery. It downloads macOS straight from Apple, with no USB needed. It's just slow on a weak connection.
Ventoy is great for Windows and Linux ISOs, but it can't boot a macOS installer, so keep a separate drive for the Mac.
A few things I learned
- Keep the installer app. Copy "Install macOS….app" to an external drive before you upgrade, because the upgrade deletes it.
- Label the USB drive itself. A strip of tape that says "macOS 27" saves you booting the wrong version on an older Mac.
- Use a decent USB 3 drive. Cheap drives are what fail with "Error erasing disk" halfway through.
- Remake it after big updates. The installer then includes the latest fixes, so a fresh install needs fewer updates afterwards.
If you set up Windows machines too, see installing Windows 11 without a Microsoft account and installing Windows 11 over a network with Serva. For a whole office of Macs and PCs to set up, my IT services cover that.
Frequently asked questions
What size USB drive do I need for a macOS installer?
Apple says a 32 GB drive is more than enough for any macOS installer, and 16 GB is enough for most older versions. If the drive is too small, Terminal tells you before it starts.
Does createinstallmedia erase my USB drive?
Yes. It erases the whole volume before copying the installer, so copy anything you need off the drive first.
Does one USB installer work on both Intel and Apple silicon Macs?
Yes, as long as both Macs support that macOS version. Only the way you boot from it differs: hold the power button on Apple silicon, or hold Option on Intel.
Can I make a macOS bootable USB on Windows?
Not with Apple's supported method, because createinstallmedia only runs on macOS. Borrow a Mac to build the drive, or use macOS Recovery on the Mac you want to fix, which downloads macOS from Apple.
Why won't my Intel Mac boot from the USB installer?
Intel Macs with the Apple T2 chip block external boot by default. Start up holding Command and R, open Startup Security Utility and allow booting from external or removable media. Also plug the drive in directly, not through a hub.
